If you want to send calls using SIP you have to define in dial-peer. Add "session protocol sipv2" to dial-peer voice 2 voip interface.
-----Original Message----- From: Wasif [mailto:[EMAIL PROTECTED] Sent: Thursday, June 15, 2006 8:19 PM To: [email protected] Subject: [Asterisk-Users] Asterisk & Cisco 3800 Hi, I have Cisco 3800 12.3(11)T1 . I ask my provider to point all DID sip based to hit CISCO and from there I take them to Asterisk, both boxes are on public IP address. I just want to disclose my Cisco IP to vendors. But somehow DID are not hitting to Asterisk properly. I think there something worn in Cisco configuration. I am using dial-peer voice 1 voip description incoming DID incoming called-number xxxxxxxxxx dial-peer voice 2 voip description Outgoing to Tangerine huntstop destination-pattern XXXXXXXXXX session target ipv4:xx.xx.xx.xx dtmf-relay h245-signal h245-alphanumeric any idea ?. Thank _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
