Create yourself a crossover cable and loop the spans, set one to provide clock and you should quickly see them come up, this will provide a very basic test of hardware.
Steve -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Julian Lyndon-Smith Sent: 16 June 2006 10:20 To: [email protected] Subject: [Asterisk-Users] sangoma card test Is there any way of running a diagnostic on a Sangoma A102 card ? Our lines have gone down and I want to avoid the usual BT "It must be your equipment" line with technical proof. At the moment I have a BLUE/RED alarm on zap show status Julian. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users The information contained in this email is intended for the personal and confidential use of the addressee only. It may also be privileged information. If you are not the intended recipient then you are hereby notified that you have received this document in error and that any review, distribution or copying of this document is strictly prohibited. If you have received this communication in error, please notify Brendata immediately on: +44 (0)1268 466100, or email '[EMAIL PROTECTED]' Brendata (UK) Ltd Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX UK Registered Office as above. Registered in England No. 2764339 See our current vacancies at www.brendata.co.uk _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
