For a single BRI the Netjet is the way to go. I have the card running with the mISDN drivers. I haven't tried capi yet but seems to work great in ptp mode.
Regards Mark Brooker T: 02 4959 8670 M: 0415 846 865 F: 02 4950 5609 E: [EMAIL PROTECTED] W: http://www.mbit.com.au -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of James Harper Sent: Sunday, 18 June 2006 4:25 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Re: ISDN BRI NetJet > On Sat, Jun 17, 2006 at 02:33:26PM -0300, Hermann Wecke wrote: > > I'm trying to use a Teles (netjet) ISDN BRI card with asterisk 1.2.9.1 > > It could work with the deprecated chan_modem. Don't wast your time. > > > Anyone was able to use this card with asterisk? I couldn't find much > > information about it. Any help? > > Replace it by some Cologne Chip Card. The single port card is cheap. > Than you can use bristuff, chan_misdn or visdn. Assuming you can get such a card where you live. In Australia there is no PCI HFC adapter available. We can get the AVM fritz card, but the importers have marked the price up quite substantially based on the fact that they have A-Tick approval on it. But as per my last post, the netjet mISDN drvier doesn't currently work, so if you can find an alternate card where you are then do that. James _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
