I have a half working configuration:
I have an asterisk box with one GS101 register to it in SIP mode and an IP10S in MGCP mode.
I can dial IP10S from my GS101 and everything seems fine.
But from my IP10S I can't dial any number (GS or anything else).
All the version I use are the latest available
Any Idea?
Regards,
Daniel
Marian Danisek a écrit:
rnc Info Lists wrote:
Hi,
-----Original Message-----
The portion of extensions.conf is: exten => 3001,1,Dial(MGCP/aaln1,20)
exten => 3001,1,Dial(MGCP/aaln/[EMAIL PROTECTED],20)
Or aaln/1@<ip> should do just fine. However this doesn't explain why there
is no dialtone on the phone..
Oh, one thought: Did you set your toneconfiguration to Europe or US ? If
you
choose custom you need to configure it another way...
Florian
Update: I changed the tone config to USA to match Asterisk. No change. I did notice that when I booted up everythign tonight that the MGCP SHOW ENDPOINTS now shows: Gateway 'ip10' at 0.0.0.0 (Dynamic) -- 'aaln/[EMAIL PROTECTED] in 'from-sip' is idle
In the messages at start up there is:
== Registered channel type 'MGCP' (Media Gateway Control Protocol (MGCP))
-- MGCP Auditing endpoint aaln/[EMAIL PROTECTED] for hookstate
[chan_iax2.so]NOTICE[163851]: File chan_mgcp.c, Line 1099
(find_subchannel): Gateway '192.168.0.5' (and thus its endpoint 'aaln/1')
does not exist
-- Setting hookstate of aaln/[EMAIL PROTECTED] to ONHOOK
MGCP DEBUG shows the below lines repeating every couple of seconds: from 192.168.0.5:2427MGCP read: RSIP 1375 aaln/[EMAIL PROTECTED] MGCP 1.0 NCS 1.0 RM: restart
from 192.168.0.5:2427Verb: 'RSIP', Identifier: '1375', Endpoint: 'aaln/[EMAIL PROTECTED]', Version: 'MGCP 1.0' 2 headers, 0 lines
Still no dialtone and not able to send or receive calls.
Evidently there is a problem finding the phone. I can ping it from the Asterisk server so isn't a raw IP issue. On the phone there is the message "Waiting for call manager"
Additional ideas are appreciated. Will keep plugging away at it.
in sending you my mgcp.conf file, my ip10s mostly working fine...
regards Marian
-------mgcp.conf-----------------
[general] port = 2427 bindaddr = 192.168.1.253
[192.168.1.92] threewaycalling=yes transfer=yes callwaiting=yes callwaitingcallerid=yes host=192.168.1.92 context=local nat=no ;dtmf=inband disallow=all allow=g711 allow=alaw callerid = John <92> line => aaln/1
[192.168.1.91] threewaycalling=yes transfer=yes callwaiting=no callwaitingcallerid=no host=192.168.1.91 context=local nat=no ;dtmf=inband disallow=all allow=g711 allow=alaw callerid = Mary <91> line => aaln/1
Robert
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
-- Daniel ANDRE (mailto:[EMAIL PROTECTED]) IRIS Technologies - http://www.iris-tech.com Serveur kwartz - http://www.kwartz.com
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
