Re: [Asterisk-Users] Polycom 601 problems with multiple registrations

Wed, 21 Jun 2006 12:53:17 -0700 

Couple thoughts/observations

Yes you WILL get this working:)
since your .cfg is just a snippet and not the complete lines, kinda hard to know exactly.
Hopefully you have the complete file and are just sending the relevant pieces to the list.
Also, if you enable sip debug, do you even see registration messages from the other lines? 
On Jun 21, 2006, at 12:09 PM, Brian Vincent (C) wrote:


I’m stumped on this one and any help would be greatly appreciated.
I’m just trying to get my Polycom 601 to have multiple extensions on it. For example, on line 1 I want extension 21, on line 2 I want extension 22, and on line 3 I want extension 23. Ideally I’d actually have each extension appear on 2 lines and therefore filling up all 6. I should be able to do that with the reg.x.lineKeys parameter. Anyway, I’m not even at the point of getting multiple registrations to work, so I’ll worry about that later. Right now the only thing that works is registering the first extension – it registers just fine and works as expected. No matter what extension I put on there it works, but I only have line 1 working. What am I doing wrong?
Okay, now my config. I’ve got a REALLY basic set up. I copied the files off the wiki from krisk.org. I completely removed ipmid.cfg temporarily so it wouldn’t interfere with this (putting it back in place has no effect). That leaves me with just sip.cfg and the phone cfg file. I’m booting with FTP. I know the config files are loading correctly because I can make changes and they do have an effect. Here’s the phone20.cfg file for the phone: 


<?xml version="1.0" encoding="UTF-8" standalone="yes"?>

<!-- Example Per-phone Configuration File -->

<!-- $Revision: 1.59 $  $Date: 2004/05/22 00:50:41 $ -->

<phone1>

<reg

  reg.1.address="21"

  reg.1.auth.userId="21"

  reg.1.auth.password="21"

  reg.1.server.1.address="10.20.0.1"

  reg.2.address="22"

  reg.2.auth.userId="22"

  reg.2.auth.password="22"

  reg.2.server.1.address="10.20.0.1"

  reg.3.address="23"

  reg.3.auth.userId="23"

  reg.3.auth.password="23"

  reg.3.server.1.address="10.20.0.1" />


</phone1>


And sip.cfg:


<!-- IP Application Configuration File -->

<!--

 $Revision: 1.57.2.1 $  $Date: 2004/07/27 00:23:34 $

-->


<sip>


<voIpProt>

<local voIpProt.local.port="5060"/>
<server voIpProt.server.1.address="10.20.0.1" voIpProt.server. 1.port="5060" voIp
Prot.server.1.transport="UDPonly" voIpProt.server.1.expires="3600" voIpProt.serv
er.1.register="1" voIpProt.server.1.retryTimeOut="0" voIpProt.server.1.retryMaxC 

ount="0" voIpProt.server.1.expires.lineSeize="30"/>
<SIP voIpProt.SIP.useRFC2543hold="1" voIpProt.SIP.lcs="0" voIpProt.SIP.sendCompactHdrs="0" voIpProt.SIP.WM50="0" voIpProt.SIP.keepalive.sessionTimers="0" voIpProt.SIP.requestURI.E164.addGlobalPrefix="">
<outboundProxy voIpProt.SIP.outboundProxy.address="" voIpProt.SIP.outboundProxy.port="5060"/>
<alertInfo voIpProt.SIP.alertInfo.1.value="AA" voIpProt.SIP.alertInfo.1.class="3 "/>
<alertInfo voIpProt.SIP.alertInfo.2.value="RA" voIpProt.SIP.alertInfo.2.class="4 "/>
<requestValidation voIpProt.SIP.requestValidation. 1.request="" voIpProt.SIP.requestValidation.1.method="" voIpProt.SIP.requestValidation.1.request.1.event=""> 

<digest voIpProt.SIP.requestValidation.digest.realm="10.20.0.1"/>

</requestValidation>
<specialEvent voIpProt.SIP.specialEvent.lineSeize.nonStandard="1" voIpProt.SIP.specialEvent.checkSync.alwaysReboot="0"/> 

<conference voIpProt.SIP.conference.address=""/>

</SIP>

</voIpProt>
<dialplan dialplan.impossibleMatchHandling="2" dialplan.removeEndOfDial= 

"1">
<digitmap dialplan.digitmap="[2-9]11|0T|011xxx.T|[0-1][2-9] xxxxxxxxx|[2-9]xxxxxx 

xxx|[2-9]xxxT" dialplan.digitmap.timeOut="3"/>


        <routing>
<server dialplan.routing.server.1.address="" dialplan.routing.server.1.port="506 

0"/>
<emergency dialplan.routing.emergency.1.value="911" dialplan.routing.emergency.1 

.server.1="1"/>

</routing>

</dialplan>


        <logging>


        <level>

<change log.level.change.sip="4" log.level.change.sip.obs="5"/>

</level>

</logging>

</sip>

-------------------
Brian Vincent
Copper Mountain Telecom
[EMAIL PROTECTED]
______________________________________________________________________ ________________________________________
Confidentiality Warning: This message and any attachments are intended only for the use of the intended recipient(s), are confidential, and may be privileged. If you are not the intended recipient, you are hereby notified that any review, retransmission, conversion to hard copy, copying, circulation or other use of this message and any attachments is strictly prohibited. If you are not the intended recipient, please notify the sender immediately by return e-mail, and delete this 
message and any attachments from your system. Thank you.
______________________________________________________________________ ________________________________________ 

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to