Hi All, I have setup 2 asterisk servers using AAH 2.8. I have configured a IAX2 trunk between the 2 servers using the guide on dumbme. Trunk is not using register string and no authentication.
In my dial plan I have 7XX numers on server B and 6xx numbers on Server A. Calls from my SNOM phones are ok between the extensions on the 2 servers. In server A I have a eicon 4 port BRI card connected. Calls from outside to extensions on server A works fine. (Inbound routes are configured for "local" extensions). Now how do I configure so that extensions on server B can be called from the ISDN connections ? like this ISDN -> ServerA ->(IAX2)-> ServerB -> extension Server A does not have direct network access to the SNOM phone. >From my reading I think that I have to make an inbound route or asterisk will not treat the call at all. This is also what I see if I debug capi. I have tried to make an inbound route and custom extension for all 7XX extentions and then entering the dial string IAX2/astB/7255 for extention 725. Also tried the dial string IAX2/[EMAIL PROTECTED] with no luck. How do I do this ? Pls help anyone. Regards Thomas _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
