As far as why it is only ringing one of your external numbers, I can only guess (with the limited information) that you may only have a single outbound channel available on your trunk so the second number is getting rejected? (Look in the log and see if it tells you that or if not provides additonal clues).
p
<[EMAIL PROTECTED]><[EMAIL PROTECTED]>
From: "Brian McCarey" <[EMAIL PROTECTED]>
To: "'Asterisk Users Mailing List - Non-Commercial Discussion'"
<[email protected]>
Date: Thu, 22 Jun 2006 18:40:25 +0100
Subject: [Asterisk-Users] Passing DID to external number?
[EMAIL PROTECTED]>[EMAIL PROTECTED]>Hi,We run a small switchboard using Asterisk and Free PBX.We have two main extensions and two ring groups. The first ring group rings the two internal extensions. If the internal extensions do not pick up the call after 15 seconds then the second ring group kicks in which should ring the two internal extensions plus two external numbers.Firstly, how do I pass the DID number of an incoming call to the external number so that the external number sees the incoming number and not the voip dial out number?Secondly, when the second ring group kicks in only one of the external numbers dials when both internal extensions and both external numbers should ring according to the ring group setting. Any ideals what's going wrong?Kind regardsBrian. UK
How low will we go? Check out Yahoo! Messengers low PC-to-Phone call rates.
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
