Steve Totaro wrote: > Thomas Kenyon wrote: >> I have a TDM400 card with 3x FXO and 1x FXS ports on it. >> >> At the moment I'd prefer (till I can get it working more reliable with >> iaxmodem), for a faxmodem to answer one of the lines instead of the >> linecard. >> >> I've tried changing the context of that line so that the exten => s does >> nothing, but that stops the line from being able to receive calls (get a >> recorded This number is not accepting calls at the moment). >> >> So my 2 questions are... >> >> How do I set one of the channels in zaptel.conf (or elsewhere) so that >> it is only available for making calls (and not receiving them). >> >> Does Zaptel automatically switch echo cancellation off if it detects a >> fax call? >> >> TIA for any help with these. > 1. Use the group= option to decide how you want to use your channels. Do you mean by putting the channels I want to answer i na group and then making that the pickupgroup ?
Because that also causes the line to stop accepting incoming calls, (rather than just asterisk). > 2. No, I don't think so, I think echocancelwhenbridged=no might be > the solution there. > I hope so, that fixed the problems bridging between channels whilst using a PDQ, I didn't have time when I was there to see if it improved fax reception. > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
