Hi Richard, I have the interconnection in qsig, functioning but that problem of the calls is occurring to be dumb some times. Use qsig because of the easinesses as caller id and name of the origin in the destination telephone. You can help me? It knows if the easinesses to enter the equipment are compatible as callpickup, transfer?
Regards
Josué
2006/6/27, richard Coco <[EMAIL PROTECTED]>:
Hi Josue...
i have taken a short look at the configuration you
sent to me off list.
First of all, try to change the protocol from ECMAV2
to ETSI or EDSS1 (set the segmentation to 1) and like
suggested by Silviu change the switchtype=EuroISDN
too. EcmaV2 is normaly used to interconnect Siemens
PBXs.
Something strange is that in the HISTA you have
severals "CIRCUIT EXT DIALTONE ERROR" from the TM2LP
(analog trunk line).
i will compare tomorrow the COT with the one we have
configured at the office...
rich
--- Josue Conti < [EMAIL PROTECTED]> wrote:
> Hi Richard
> Thank you very much for its attention
> Below my configurations of HiPath the 4000 and
> asterisk-1.2.9.1 Agrade�o its
> attention, if to need something to communicate
> itself
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
