is the following zaptel.conf configuration correct for TDMoE used for pri-cpe signalling - is this possible at all ? I couldn't find an example...
loadzone=nl defaultzone=nl # pri E1 card span=1,1,3,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31 # hfc-pci 1 span=2,1,3,ccs,ami bchan=32-33 dchan=34 # hfc-pci 2 span=3,1,3,ccs,ami bchan=35-36 dchan=37 #TDMoE dynamic=eth,eth0/00:D0:09:E8:FA:EB,31,0 bchan=38-52 dchan=53 bchan=54-68 [EMAIL PROTECTED] schrieb am 27.06.2006 17:01:26: > [EMAIL PROTECTED] wrote: > > is it possible to route an ISDN-Data channel over an iax-connection ? > > > > the setup is > > > > pc with isdn-card -> (zaphfc) Asterisk Server1 (iax) -> (iax) Asterisk > > Server2 (E1) -> connecting to an external isdn-dialin router > > > > via the iax-line the call is transfered as speech which is not accepted at > > the remote end > > IAX is not suited for this. Maybe TDMoE is an option for you ? > > Florian > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users