Because: usg(2)[EMAIL PROTECTED] causes the app to exit with a non-zero status,
Because: [EMAIL PROTECTED]|g(2) causes asterisk to hard crash. And trying to use g2 in either case doesn't work either. Cullin -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dustin Wildes Sent: Wednesday, June 28, 2006 1:03 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Voicemail volume adjustment Why use an application like sox - when you can make the voicemail application do it natively: exten => s,1,Dial(SIP/100,10) exten => s,2,Voicemail([EMAIL PROTECTED]|ug(10)) The key is the g(10) parameter: From the 'show application voicemail': g(#) - Use the specified amount of gain when recording the voicemail message. The units are whole-number decibels (dB). > >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of Technical >Support >Sent: Tuesday, June 27, 2006 3:51 PM >To: [email protected] >Subject: [Asterisk-Users] Voicemail volume adjustment > >I frequently find voice messages are emailed to users with insufficient >volume - barely audible. I would like to have asterisk run a sox >command to adjust the volume of each message before emailing (perhaps >once the message has been left). > >Has anyone done this? Care to share the steps? > >Thanks, >MD > > > > > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
