If you do not use USB then I would suggest to disable this in the bios. Henk
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of James Harper Sent: donderdag 29 juni 2006 14:56 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Very bad quality with AVM Fritz!cardPCIandchan_capi > > > That is possible, how could I check that? > > > I can see that IRQ 17 is shared between eth0 and my fritz!card > > but I > > > don't know if it changes anything: > > > > Can you try it (or eth0) in a different slot (or change IRQ's in the > > BIOS if possible) to see if it makes any difference? That's the > > only way > > to know for sure, anything else is just speculation :) > > > > James > > Unfortunately I can't, because the LAN board is integrated and I have no > PCI device left anymore. You seem to have 2 wctdm adapters. Can you swap one of them with the fritz card? James _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
