-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Angelito Manansala ha scritto: > Hello List, > > Can anyone here has a working configuration of any digium e1 card that is > connected to cisco 3800.
The problem is the router configuration... you need these setups to try some configuration on the Linux side. Otherwise: try a cross cable (PRI cross cable is really different) and some configuration, with E1 you have only two/four configuration possibile for the D channel, 8 if you consider also CRC. All changes are in zaptel.conf in the span line (see the documentation). This is the last configuration found for a CISCO router with E1 interface, is the SAME configuration for the E1 line directly coming from telco in italy. I made some effort to obtain the router working exactly as the telco. I dont have the router configuration. zaptel.conf span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 zapata.conf signalling = pri_cpe channel => 1-15,17-31 resetinterval = never immediate=no overlapdial=yes -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFEo9g33r4gvOdjXD0RApSvAKCBW7e0W7uKvbsgR9oH+PcS+J5Y6ACg04PB sGt2zlBRs/vP11FeDoCBDL0= =Lz42 -----END PGP SIGNATURE----- _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
