Have you startet the asterisk allready?
When i boot my machine, and dont start the astersik, the LED's keep
flashing all day. (even when lines are connected) and
even if /etc/init/misdn_init has been startet
TIP: First connect all Lines/Phones to the card, then start asterisk.
not 100% sure,
but i think the card or the asterisk, or the isdn stack, will not
recognize any new lines added during a running asterisk "session".
Giorgio Incantalupo schrieb:
Hi,
I've just installed a beronet BNS40 on Asterisk 1.2.9.1. Everything
seems ok, asterisk gives no error (nothing inside logs) but the 4 led
on the back of the card (which is NOT connected to an ISDN line) are
red and flashing....what does it mean? Is it not properly working or
it means the card is not connected to any ISDN line? The card handbook
says the card has red led but not their meaning.
TIA
Giorgio Incantalupo
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
