Hi
I tried that too, but the only useful thing I can change
(besides the IP settings of the phone itself) is the "CallSv" parameter; I set
it to the IP of the SIP registrar/proxy but it still doesn't
work...
Silviu
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Henk
Sent: 29 June 2006 21:16 To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] Avaya 4610sw SIP setup problem Did you try to manually
to change the parameters of the phone? When you power the phone up
then are you able to enter manually the parameter when you hit *. I
am using a 4610 with Release 2.2 but I am not using the capability to upload the
settings from the server. Henk From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Herchi Silviu I just tried serving
the files off Apache, port 80, no change... Most parameters are taken into
account by the phone, except for SIP proxy and SIP
registrar... Coud someone post an
excerpt from their 46xxsettings.txt where I could see the format they
use? Thank you in
advance, Silviu From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Tom Lynn I too am using 2.2.2, but I'm loading my
config files via HTTP. I was having some difficulty when I was using
TFTP. Things were not as reliable for me, so I switched to HTTP.
I've been stable since. On 6/28/06, Herchi Silviu <[EMAIL PROTECTED]>
wrote: Hi
Tom, Thank you for your
interest in my problem, I really am desperate about this
thing... I have tried several
versions one after another, and now I'm using the one released on 04.07.2006
(SIP release 2.2.2). Thanks, Silviu From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Tom Lynn Which version of firmware are you
using? On 6/27/06, Herchi Silviu <[EMAIL PROTECTED]> wrote:
Hi all, I've been pulling my hair out for
two days over this problem… I did *a lot* of Googling around, I searched the
list archives to no avail - no one has the same problem! I have two Avaya 4610sw phones. I installed the latest SIP firmware using
the TFTP server. So far everything looks good. Each time the phone boots, it
retrieves the 46xxsettings.txt from the TFTP server. My problem is that the SIP
PROXY, SIP DOMAIN and SIP REGISTRAR are simply ignored. The phone does take into
account other values (WEB PROXY, etc), but it keps displaying "Registering…" for
ever. When I check the IP adresses, the SIP Proxy and Registrar fields are
empty. This is not a network problem, I
have made traces using Ethereal and I can see the right .txt file being
transferred. Other settings in the file are applied too, just the SIP proxy and
registrar are empty… I have tried specifying them with and without quotes, by
hostname, by IP address, … Nada. It is all the more frustrating that
everybody seems to have it working easily! Please help. Here is the contents of my
46xxsettings.txt file : SET DOMAIN mycompany.com
|
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users