I am using latest firmware, exactly 1.52
I am used to use PA168S phones in SIP mode (in the past I had problems
using them as IAX., i.e. passing calls and so on....)
This is only for a test purpose, to test OH323 channel. It is not a
crritical issue, i never will use H323 on PA168S phones in a production
environment. I was only very suprised about this strange behaviour, and I
would like to investigate it.
Andrea
Thomas Kenyon
<[EMAIL PROTECTED]
ius.co.uk> To
Sent by: Asterisk Users Mailing List -
asterisk-users-bo Non-Commercial Discussion
[EMAIL PROTECTED] <[email protected]>
m.com cc
Subject
30/06/2006 11.42 Re: [Asterisk-Users] OH323 issue on
AT320 Phones
Please respond to
Asterisk Users
Mailing List -
Non-Commercial
Discussion
<[EMAIL PROTECTED]
ists.digium.com>
[EMAIL PROTECTED] wrote:
> Hi all, I installed asterisk 1.2 branch, with oh323 channel support.
>
> Everything is fine, with netmeeting I can call and receive incoming
calls,
> internal and external
>
> Then I tried to setup an AT320 phone , which is based on PA168S chip.
>
>
Which version of the PA168S firmware are you using? (lastest is 1.52).
Why are you using the H.323 firmware? (since the IAX firmware works, as
does the SIP, although I'd recommend the SIP, since attended call
transfer doesn't work with the IAX version).
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
