I found my mistake jiterbuffer=yes vs. jitterbuffer=yes ;-)
currently I have this settings, and seems this working quite well,
only sometimes gaps appears, when jitter changes too much eg. >500ms -
jitterbuffer probably can't adapt so quick,
maybe good idea to set some minimum jitterbuffer value, but this is not
possible in current new jitterbuffer implemenation
PJ
jitterbuffer=yes
forcejitterbuffer=yes
maxjitterbuffer=1500
maxjitterinterps=10
resyncthreshold=2000
Pavel Jezek wrote:
hello, I'm still trying to tune iax jitterbuffer in asterisk 1.2.9.1,
but without success,
I'm using idefisk->asterisk over cdma network, where rtt is about
100-500ms, so jitter about 400ms
but sound is very jerky, in diection idefisk->asterisk, in reverse
direction is sound relatively smoth,
so, my question:
has iax same problem as in sip/rtp, where packets are generated along
incomming packets (what is probably solved in trunk with:
http://bugs.digium.com/view.php?id=5374
0005374: [patch] Asynchronous generation of outgoing frames when
timing device available
my iax jitterbuffer settings (iax.conf):
[general]
jiterbuffer=yes
forcejitterbuffer=yes
maxjitterbuffer=1500
resyncthreshold=-1
thanks for suggestions ;-)
PJ
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
