I have 1.0.3.81. How do you execute the transfer? Thanks,
Steven -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Brown (CV) Sent: Monday, November 03, 2003 8:58 PM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] Transfer from Grandstream BT100? what version of GS firmware are you running ? I call from PSTN to GS, GS does xfer to XTEN, hang up GS call continues if you aren't running 1.0.3.81 or newer, then upgrade :) john brown chagres On Mon, Nov 03, 2003 at 06:15:02PM -0600, Steven Sokol wrote: > Hi, > > Does anybody know how to properly execute a transfer (without using the > |Tt option) from a GS100? Scenario: > > 1. I call from X-PRO (ext 1100) to Grandstream (1101). > 2. Grandstream answers. Call is established. > 3. Press [TRANSFER] on the Grandstream. X-PRO caller is put on hold. > Grandstream gets dial tone. > 4. Grandstream dials 1103 (the extension of another GS100). > 5. Grandstream hangs up. > 6. Call is torn down. BYE messages sent from GS to X-PRO. X-PRO sends > BYE in response. > > This is the method suggested by the GS100 manual. I have tried both > using the [TRANSFER] and the [FLASH] keys, to no avail. Same with > pressing [TRANSFER] or [FLASH] to complete the transfer (instead of > hanging up). > > I can transfer calls from X-PRO without any problem. > > Thanks! > > Steve > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
