> I'm going to use Cisco 7960's for the phones; is there a better phone I > should be using?
excellent choice. > I need to know if this is possible... > > On each phone program the appearances of 4 "Extensions" that are really > the 4 phone lines? yes for inbound. 1 rings 1... 2 rings 2.. and so on. Not the best method of doing this.. but ok. > If Phone "A" puts line 1 on hold can phone "B" see it on hold or will it > just show off hook? Not possible with SIP... might be with Skinny. Use parking or transfer. > Can the phones ring back (Even the one that did not put the call on > hold) if it's not picked up in 30 or so seconds? Nope. (See previous answer) > If phone A is using line 1 and phone B is using line 2 will phone C see > the other 2 call appearances? Nope. (Not with SIP) > MOST IMPORTANT can I use 4 X100P's in the same box? What can I expect? > >From what I read in the posts the X100P is a $10 modem marked up to pay > for the Asterisk dev, and I don't mind paying for that I just want to > make sure they are reliable and will get the job done, they will get a > good workout for about 3 hours a day! I have 3 in my Dell Poweredge 500SC but you need to have a good bios. One that will let you put each card on its own IRQ. > This email transmission and any attachments are for the sole use of the > intended recipient(s) and may contain confidential and privileged > information that is the sole property of PathAxis, Inc. Any unauthorized > review, use, disclosure or distribution is prohibited. If you are not > the intended recipient, please contact the sender and destroy and delete > all copies of this email and any attachments. These warnings are stupid. They should be at the top if you really want people to read them. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
