The MGCP versions will have a "-CS" annotated at the end of the part number.
Ex IP500CS
Cory J Andrews
++++++++++++
VOIPSupply.com
454 Sonwil Drive
Buffalo, NY 14225
++++++++++++++
voice - 716.630.1555 X22
email - [EMAIL PROTECTED]
AIM - B2CORY
----- Original Message -----
From: "Eric "ManxPower" Wieling" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<[email protected]>
Sent: Monday, July 03, 2006 1:03 PM
Subject: Re: [Asterisk-Users] Polycom Soundpoint IP 301 w/ MGCP
There are different versionsof the polycom phones. Depending on the
actual part number it can come with MCGP, SIP, or H323. Polycom does not
support customer migration from one protocol to another. Get the version
with the SIP firmware.
Jim Freeze wrote:
Hi
I was about to order a polycom 301 when I noticed that the VoIP protocol
is listed
as MGCP and not SIP, as with the 501.
First, what is MGCP?
And, will the 301's work seamlessly with Asterisk and the other 501
phones that I have?
--
Now accepting new clients in Birmingham, Atlanta, Huntsville, Chattanooga,
and Montgomery.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
