Hi Michael,
I have a TDM400P on an Asterisk box with:
1) a FXO connected to the old pbx and
2) a FXS connected to a normal analog phone
3) the analog phone is a Telecom Sirio, (the most common in Italy)
If I knew how to check asterisk send/receive this non-digits signals it
can be easier to understand if everything is going wrong, even for the
future...I do not think installing Asterisk keeping an old PBX is so
uncommon.
TIA
Giorgio Incantalupo.
Michael Collins wrote:
you say Flash asterisk command send a flash signal to old pbx so that
it
sees that command as coming from an analog phone. But since Flash is
not
a digit, how can I catch it from within asterisk? How can I tell
asterisk (es inside extensions.conf) to do something whene receive it
from a phone?
Giorgio,
Could you please give us some more information about your setup? Two
really important questions:
#1 - how are you connected from Asterisk to the PBX? (FXO/FXS, T1,
etc.?)
#2 - how are you connected from Asterisk to the telephone? (SIP, FXS,
etc.?)
#3 - What kind of telephone are you using?
Knowing this will help us figure out what is going on.
-MC
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
