really is that easy ? i thought this will refuse any codec that isn't gsm instead, it forces the convertion ... amazing ! thank you very much for your help !
regards .mike On Wed, 2006-07-05 at 14:58 -0400, Raymond McKay wrote: > > sip phone (ulaw) -> asterisk -> internet <- asterisk <- sip phone (ulaw) > > > > it is possible to force the two asterisk to convert the codec from ulaw > > to, say, gsm ? > > i mean, without touching the two sip phones > > > Of course. > > On the trunk between the two Asterisk servers, just add > > disallow=all > allow=gsm > > to the trunk config. From that point on, only GSM will transverse the trunk > and the two asterisk boxes will transcode. Remember though, transcoding > takes processor power so if you have more than one phone on each end, you > are going to eat up processor power quick. > > Raymond McKay > President > RAYNET Technologies LLC > http://www.raynettech.com > (860) 693-2226 x 31 > Toll Free (877) 693-2226 > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
