here is the dialplan snippet
[default]
exten=> s,1,Answer
exten=> s,2,Goto(1234,1)
exten=> 1234,1,MeetMe(1234|AMpPw|0000)
exten=> 1234,2,Hangup()
it always uses the s extension path to go to the MeetMe confrenece room, and i also cant enter the pin obviously.
On 7/6/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]
> wrote:
try setting your dial plan in sip.conf using dtmf = rfc2833-------------- Original message --------------
From: El Flynn < [EMAIL PROTECTED]>
> Rizwan Hisham wrote:
> > Hi,
> > i need to set the dtmf mode on my quintum tenor a400 gateway.
>
> You might want to check the a400 manual on how to do that.
>
> > i cant dial
> > any extension thru my normal digital phone which is connected to asterisk
> > thru the quintum gateway. it always falls to 's' extension. So plz help
> >
>
> This is most likely a misconfiguration of your dialplan and/or sip.conf files.
> it would help if you post it here?
>
> Flynn
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or updat e options visit:
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Regards
Rizwan Hisham
Software Engineer
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
