> > > > > > Hi everyone, > > > > > > > > > > > > I have Asterisk SVN-trunk-r7498 running for a few months and I'm quite > > > > > > happy with it. However, I am experiencing a quality issue with my AVM > > > > > > Fritz!card PCI which is used with chan_capi. When somebody calls me on > > > > > > this line he hears a lot of noise and I hear "scratches" and > > > > > > "plops". It > > > > > > is very annoying. Below is is my /etc/asterisk/capi.conf > > > > > > I've tried to play with echotail and echosquelch but the quality is > > > > > > always terrible. > > > > > > > > > > > > Any suggestion is welcomed. > > > > > > Ben
> > > > > I can see that IRQ 17 is shared between eth0 and my fritz!card but I > > > > > don't know if it changes anything: > > > > > > > > > > Ben > > > > Can you try it (or eth0) in a different slot (or change IRQ's in the > > > > BIOS if possible) to see if it makes any difference? That's the only way > > > > to know for sure, anything else is just speculation :) > > > > > > > > James > > > Unfortunately I can't, because the LAN board is integrated and I > > > haveno > > > PCI device left anymore. > > > > > > Ben > > You seem to have 2 wctdm adapters. Can you swap one of them with the fritz card? > > I'll try the usb trick first, and then if it doesn't work I'll try to > > swap one of the TDM400 with the fritz. But I can't do it now because > > people in my company won't be able to phone while I do that, which is > > completely impossible. > > > > Ben > Yep. It's always the users causing problems! > > Good luck! > > James So I've just had the time to swap and disable usb in my bios and it changed nothing the quality is still the same (which means horrible). How could I check where the problem comes from? Ben _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
