Hi Marcin,
Marcin J. Kowalczyk wrote:
hI,
I've got problem with zaphfc kernel module. After I load into kernel i
receive something like that into syslog:
0 16:56:42 viperprint-de kernel: zaphfc: empty HDLC frame or bad CRC
received (framelen = 5, stat = 0xff, card = 0).
Jul 10 16:56:42 viperprint-de kernel: zaphfc: empty HDLC frame or bad
CRC received (framelen = 3, stat = 0xff, card = 0).
Jul 10 16:56:42 viperprint-de kernel: zaphfc: empty HDLC frame or bad
CRC received (framelen = 30, stat = 0xfc, card = 0).
in my zapta.conf i'vh got:
[channels]
language=en
signalling = bri_net_ptmp
group = 1
context=default
channel => 1
i've tried to change bri_net_ptmp into bri_cpe_ptmp but it didn't help.
ISDN card is connected with good cable (i've plugged out phone) - or
should I use ISDN crossover cable?
I've searched google, but I didn't find anything helpfull.
Regards,
Marcin
If you want to connect a telephone to the HFC card you need a crossed
cable to connect to an NTBA to which you connect the phones.
As far as I know you don't need a crossed cable when you connect the
phone directly.
Have you set HFC mode correctly (NT or TE)?
Kai
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
