One of the ends must be configured as pri_net and the other as
pri_cpe. By the error I think the problem is with your configuration,
does zttool says no alarms in spans?
Post your configuration files zapata.conf and zaptel.conf
Regards
On 7/7/06, Marco Mouta <[EMAIL PROTECTED]> wrote:
> by Ports i mean Spans :)
>
> On 7/7/06, Marco Mouta < [EMAIL PROTECTED]> wrote:
> > Newbie guess,
> >
> > Don't you need to set one of the ports NT mode and the other one as TE mode?
> >
> > hope it helps
> >
> > Best regards,
> >
> > PS. give me some feed back if it solved.
Hi folks,
that was my first try.
I had set all the first E1 channel as pri_net and all the second E1 channel as pri_cpe but I got this error.
chan_zap.c: PRI Error: We think we-re the network, but they think they're the network, too.
When I set everybody as pri_net this message stops.
Today, I put the E1 channel to work, it was only set the channel to pri_cpe and dial !
I still without know why the previous tests didn´t work.
Thanks everybody.
--
Ralph Liebessohn
ICQ: 74835911
Skype: liebessohn
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
