In dial plan, we can set the priority. However, I find that the
priority count is a global value. It will continue to increment no
matter in different context. Below is what I have tried.
--------------------------------
In extension.conf
[testflow]
exten => _X.,1,NoOp(testflow,1=${CALLERID(NUM)})
exten => _X.,2,NoOp(testflow,2=${CALLERID(NUM)})
include => testflow1
include => testflow2
include => testflow3
[testflow1]
exten => _X.,1,NoOp(testflow1,1=${CALLERID(NUM)})
exten => _X.,2,NoOp(testflow1,2=${CALLERID(NUM)})
exten => _X.,3,NoOp(testflow1,3=${CALLERID(NUM)})
[testflow2]
exten => _X.,1,NoOp(testflow2,1=${CALLERID(NUM)})
exten => _X.,2,NoOp(testflow2,2=${CALLERID(NUM)})
exten => _X.,3,NoOp(testflow2,3=${CALLERID(NUM)})
exten => _X.,4,NoOp(testflow2,4=${CALLERID(NUM)})
[testflow3]
exten => _X.,1,NoOp(testflow3,1=${CALLERID(NUM)})
exten => _X.,2,NoOp(testflow3,2=${CALLERID(NUM)})
exten => _X.,3,NoOp(testflow3,3=${CALLERID(NUM)})
exten => _X.,4,NoOp(testflow3,4=${CALLERID(NUM)})
exten => _X.,5,NoOp(testflow3,5=${CALLERID(NUM)})
-------------------------------
result in the log
-- Executing NoOp("SIP/871966760539-4467",
"testflow|1=871966760539") in new stack
-- Executing NoOp("SIP/871966760539-4467",
"testflow|2=871966760539") in new stack
-- Executing NoOp("SIP/871966760539-4467",
"testflow1|3=871966760539") in new stack
-- Executing NoOp("SIP/871966760539-4467",
"testflow2|4=871966760539") in new stack
-- Executing NoOp("SIP/871966760539-4467",
"testflow3|5=871966760539") in new stack
As you can see in context of testflow1 and afterward, the priority
start is 3 instead of 1. Is the the correct sequence of priority
execution? Can I reset it to run the priority 1 in every context?
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
