It was a simple solution. Bruce Reeves was correct. Sangoma had and
issue with their drivers and re-syncing.
I upgraded the drivers and all is good.
Thanks to those that offered help. It was much appreciated.
Greg
I had similar problems with a Sangoma card in this configuration. I
recently received from Sangoma an updated driver that fixed issues with
resyncing the clock on the card. You might try getting a hold of
Sangoma, David Yat Sin if possible and ask him about it, it may very
well be the same problew. On 7/19/06, Gregory L Miller-Kramer
<[EMAIL PROTECTED]> wrote:
>
> I have AAH2.8 on a dual Xeon system with a Sangoma A104 and an Adtran
> Channel Bank.
>
> The system has a single PRI connected to port 1 and port 2 has the T1
> cable connected to the Channel Bank. Both are configured properly and work
> for the inbound/outbound calls and soft-fax reception.
>
> I have fax machines connected to FXS ports on the channel bank. The idea
> here is to allow faxing out over the PRI from these FXS ports and for
> inbound DIDs to go to specific fax machines.
>
> I have [EMAIL PROTECTED] 2.8 setup on this system and I am pretty certain I
> have it configured correctly.
> * Each fax machine has it's own Zap extension.
> * The DID routes to the correct fax machine (zap extension).
> * I can make and receive phone calls with these fax machines. Meaning, the
> fax machine has a phone hand set. I can call out with that handset and
> receive calls on that handset.
>
> Here's the problem. When I try send or receive faxes it fails telling me
> there was a com error.
>
> Any ideas?
>
> I am at a loss. I have followed the logs. The transmit and receive work.
> Once the connection is made it fails indicating "com error".
>
> Additionally, I hear the "whistle and chirp" of fax machines talking to
> each other. Combined with being able to make and receive calls over those
> fax machine hand sets I don't know what the problem is at this point.
>
> Please, if anyone has fax machines setup with a similar situation I would
> appreciate knowing how you have it setup.
>
> OS - CentOS 4.3
> zaptel - 1.2.5
> libpri - 1.2.3
> asterisk - 1.2.9.1
> freepbx - 2.0.1
>
> Thank you,
> Greg
--
This message has been scanned for viruses and
dangerous content, and is believed to be clean.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
