Setting canreinvite=no on all the sip peers and gateway made the warm transfer work. I'm still noticing <ZOMBIE> SIP entries, is this an issue?
== Spawn extension (ANC, 1691, 2) exited non-zero on 'SIP/1691-09766938<ZOMBIE>' Thank you, Dan -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Davies Sent: Thursday, July 20, 2006 1:45 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Warm transfer issues in 1.2.10 On 7/19/06, Dan Brummer <[EMAIL PROTECTED]> wrote: > Hello, > Well I was having transfer issues in 1.2.9.1 so I downgraded to 1.2.7.1. > For testing I installed 1.2.10 on a test server and setup two Polycom > SIP phones. Tried the transfer on this configuration and had the same issues. > Here is a log from the console: > > This is how the flow goes: > > Outside call from the PSTN to ext 1678. > 1678 hits transfer button and dials 2175. > 2175 answers call, speaks, then 1678 hits transfer again. > > After that call just goes blank and we get nothing. Is there a fix > for this in the latest build? Suggestions: Firstly, check that there is no newer firmware for the Polycom SIP phones - If this were a common issue in Asterisk, I expect we'd be hearing about it a lot more... Secondly, capture a SIP trace of what is happening - It may be related to an attempt to negotiate codecs between the SIP phones, or numerous other things. Also, does it work if you set 'canreinvite=no' to keep asterisk in the call path? Worth checking, even if it is not a setting you plan on keeping. Regards, Steve _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
