Hi Steven, ----- Original Message ----- From: "Steven Critchfield" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, November 05, 2003 5:36 PM Subject: Re: [Asterisk-Users] IAX clients and the flash button
> ... > Dan, Ariel is asking you to attack this problem incorrectly. You are > correct that there doesn't seem to be a flash function in IAX. There > doesn't need to be a flash function as you can signal out of band. > Specifically for transfer there is these IAX_FRAME_IAX subclasses; > #define IAX_COMMAND_TXREQ 22 /* Transfer Request */ > #define IAX_COMMAND_TXCNT 23 /* Transfer Connect */ > #define IAX_COMMAND_TXACC 24 /* Transfer Accepted */ > #define IAX_COMMAND_TXREADY 25 /* Transfer ready */ > #define IAX_COMMAND_TXREL 26 /* Transfer release */ > #define IAX_COMMAND_TXREJ 27 /* Transfer reject */ > > This means you just need to make a software transfer button. > > Of course while your at it, you might want to look into the three way > calling functions, and any other calling functions that might need to be > added that would otherwise be used by flash hooking a zap channel. You're right. I intend to add three way calling and transfer button only after IAX2 will be the default protocol of the application. I work on it. > > Hope this helps. A lot. Thanks. Best regards, Dan _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users