|
Hi. I'm trying to install and configure a TDM01B -1 FXO card. I'm getting the following errors when starting up asterisk: Jul 25 08:48:40 WARNING[1775]: chan_zap.c:923 zt_open: Unable to specify channel 1: No such device Jul 25 08:48:40 ERROR[1775]: chan_zap.c:6879 mkintf: Unable to open channel 1: No such device here = 0, tmp->channel = 1, channel = 1 Jul 25 08:48:40 ERROR[1775]: chan_zap.c:10311 setup_zap: Unable to register channel '1' Jul 25 08:48:40 WARNING[1775]: loader.c:414 __load_resource: chan_zap.so: load_module failed, returning -1 Jul 25 08:48:40 WARNING[1775]: loader.c:554 load_modules: Loading module chan_zap.so failed! My /etc/zaptel.conf looks as follows: fxsks=1 loadzone = us defaultzone=us The relevant stuff in my /etc/asterisk/zapata.conf looks as follows: signalling=fxs_ks echocancel=yes echocancelwhenbridged=yes echotraining=400 callerid=asreceived group=1 context=sgs channel => 1 (I have attached the whole zapata.conf file) The card is properly installed in the box and the wctdm driver loads. When I type in modprobe wctdm the driver loads and the light on the card goes on. Typing in ztcf -vv gives the following: Zaptel Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured. Typing in cat /proc/zaptel/1 produces the following: Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1" 1 WCTDM/0/0 FXSKS 2 WCTDM/0/1 3 WCTDM/0/2 4 WCTDM/0/3 When I comment out the channel creation part of the zapata.conf asterisk loads fine and the CLI command "Zap show status" produces the following: localhost*CLI> zap show status Description Alarms IRQ bpviol CRC4 Wildcard TDM400P REV I Board 1 OK 0 0 0 But, when I type in "cat /dev/zap/1" I get the following: cat: /dev/zap/1: No such device Should it show sometging else. The output given by "ztcf -vv" and "cat /proc/zaptel/1" seems fine to me, but I'm not an expert. Is it fine? Please, any help will be appreciated. Thank you. Jan. |
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
