----- Original Message ----- From: Olivier MONNET [mailto:[EMAIL PROTECTED] To: Asterisk Users Mailing List - Non-Commercial Discussion [mailto:[EMAIL PROTECTED] Sent: Fri, 28 Jul 2006 05:11:35 -0300 Subject: [asterisk-users] PAP2T always busy on incoming calls with zaptel
> Hi, > I'm starting to use the new PAP2T instead of the old PAP2-NA for my > new installations. > I'm having a weird problem: when a call is comming from a zaptel > channel (from a bri with bristuff driver) the PAP2T say BUSY to the > SIP channel. What's the exact SIP response the PAP2T gives? Might it be possible to get a sip debug on a pastebin so myself and others can examine the full dialog? > I have disabled all the features like DND and call forward. > If it's the last line for this number in the dialplan I can answer > the call normally, but I can't use voicemail, because it jump to it > each time. > I have installed about 50 PAP-NA and never had this kind of problem. > If the call is coming from an other PAP2T (via asterisk with > canreinvite=no), everything is fine. > > This occur with asterisk 1.0.10 and 1.2.9.1 > > the firmware version for the PAP2T is 3.1.9(LSc) > > I am using a dialplan coming from another customer with a similar > setup, but with PAP2-NA, where it's working fine. > > What can I do to fix this. > > Regards, > Olivier > Joshua Colp Digium _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
