Hi Martin, you say only a bit of work? ;-) 1. Incoming
Yes, works like you suggest me!! The problem is that using this method, it's not possible to use the FXS ports in the Fritz!Box like normal extensions from Asterisk. We only use it to forward calls to a SIP extension. 2. Outbound I dont understand exactly your comments but I think is working. I go to the Rufumleitung -> Durchwahl (Call Through) aktiv -> definierte Durchwahl. In the combo box "Durchwahl für Anrufe auf der Rufnummer" I select my connection to Asterisk. I write a PIN and in the combo box "Anrufe weiterverbinden über die Rufnummer" I select the Festnetz. >From a SIP phone, I make a call to the extension selected in "Durchwahl für Anrufe auf der Rufnummer". In that moment another tone appears, I enter the PIN and I can make an external call from the SIP phone. Thanks for you help & greeting from Spain Manuel -----Mensaje original----- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] En nombre de [EMAIL PROTECTED] Enviado el: viernes, 28 de julio de 2006 13:50 Message: 16 Date: Fri, 28 Jul 2006 13:53:50 +0200 From: "Martin Schrott - Thinking-Systems" <[EMAIL PROTECTED]> Subject: Re: [asterisk-users] Re: Fritz!Box Fon ATA To: "Asterisk Users Mailing List - Non-Commercial Discussion" <[email protected]> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset="iso-8859-1" Hi again, should both be possible. With a bit of work ;-) 1. incoming. You will have to set Rufumleitung to your choosen sip destination. telefonie> Rufumleitung> set the fone, that is set up to be ringing to be forwarded to your sip extension. As named in your extensions.conf local context. All incoming calls should then be forwarded to your asterisk. 2. Outbound Not as easy. Maybe you can realize that as follows: Telefonie> Rufumleitung> Callthrough (Direktdurchwahl) You may be able to set internet calls from a given did to be presented a callthrough option. Set internetcalls e.g. from 12345 to callthrough via Festnetz (psd) Then it should be possible to dial through when calling from Asterisk to your Fritz!Box if your callerid is 12345. (Never tested this. But with a bit of luck and time you can do it :-) ) all the best hth Martin ----- Original Message ----- From: "Manuel Dominguez" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Friday, July 28, 2006 12:13 PM Subject: [asterisk-users] Re: Fritz!Box Fon ATA Hi Martin, Thank you for your comments. I made more or less these settings and in this moment I can make call from de FXS port to asterisk and from asterisk to FXS ports. My problem it's the FXO part of this ATA. I want to redirect all the incoming ISDN calls to a SIP phone or to an autoatendant and to make outgoing calls from sip phones (asterisk). I'm not sure if it s possible make this work using this ATA and the necessary settings. Manuel ------------------------------ Message: 8 Date: Fri, 28 Jul 2006 09:59:07 +0200 From: "Martin Schrott - Thinking-Systems" <[EMAIL PROTECTED]> Subject: Re: [asterisk-users] Fritz!Box Fon ATA To: "Asterisk Users Mailing List - Non-Commercial Discussion" <[email protected]> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset="iso-8859-1" Hi Manuel, I do not know the ATA, but we have a Fritz!Box fon, wich maybe is equal in setting it up. If you have any problems understanding the german setup, you can contact me, so I can help you in translating the needed Words :-) Normally you only have to do this on the Webinterface: Telefonie> Internettelefonie> Internetrufnummern> Neue Internetrufnummer> Internetrufnummer: Your VOIP number, or if using with isdn, then the msn. Do not use Internetrufnummer zum Anmelden verwenden! Registrar: the ip or host of your provider or Asterisk. If you have a own Asterisk use yur ip adress. There is a bug using hostnames. Benutzername: Username Passwort / Kennwort : password Do only fill out this fields, then it should work. If you put in any proxy or Stun Servers it may not work. (our experience) hth, Martin ----- Original Message ----- From: "Manuel Dominguez" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Friday, July 28, 2006 9:25 AM Subject: [asterisk-users] Fritz!Box Fon ATA Hi, I have bought a Fritz!Box Fon ATA in eBay. I'm trying to find information about configuration this box in Asterisk. Its possible use this box like a normal ATA (sipura 3000.) receiving and making ISDN calls from Asterisk? Somebody has information in English about this box? Some example settings? Another problem is that firmware is in German. I have tried to change it but was not possible to use a difference language. Some ideas? Any help would be greatly appreciated Manuel _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
