Hi,
I have problems with two trunks, ZAP3 and ZAP4. ZAP4 is connected to PSTN
line while ZAP3 is connected to analogical switchboard.
The system is able to redirect calls from ZAP4 to ZAP3, through an IVR,
but, hanging up doesn't work .
This is the CLI report where you can see, at the end, the attempt of a
native bridge instead of the call hang up.
-- Playing 'custom/aa_10' (language 'it')
............
-- Executing Macro("Zap/4-1", "dialout-trunk|1|45|") in new stack
.............
-- Executing AGI("Zap/4-1",
"recordingcheck|20060720-151752|1153401458.34") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
recordingcheck|20060720-151752|1153401458.34: Outbound recording not
enabled
-- AGI Script recordingcheck completed, returning 0
-- Executing NoOp("Zap/4-1", "No recording needed") in new stack
-- Executing Macro("Zap/4-1", "outbound-callerid|1") in new stack
-- Executing DBget("Zap/4-1", "USEROUTCID=AMPUSER//outboundcid") in new
stack
-- DBget: varname=USEROUTCID, family=AMPUSER, key=/outboundcid
-- DBget: Value not found in database.
-- Executing GotoIf("Zap/4-1", "1?4") in new stack
-- Goto (macro-outbound-callerid,s,4)
-- Executing GotoIf("Zap/4-1", "1?6") in new stack
-- Goto (macro-outbound-callerid,s,6)
-- Executing NoOp("Zap/4-1", "CallerID set to ") in new stack
-- Executing SetGroup("Zap/4-1", "OUT_1") in new stack
-- Executing GotoIf("Zap/4-1", "0?108") in new stack
-- Executing SetVar("Zap/4-1", "DIAL_NUMBER=45") in new stack
-- Executing SetVar("Zap/4-1", "DIAL_TRUNK=1") in new stack
-- Executing AGI("Zap/4-1", "fixlocalprefix") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
-- AGI Script fixlocalprefix completed, returning 0
-- Executing SetVar("Zap/4-1", "OUTNUM=45") in new stack
-- Executing Cut("Zap/4-1", "custom=OUT_1|:|1") in new stack
-- Executing GotoIf("Zap/4-1", "0?16") in new stack
-- Executing Dial("Zap/4-1", "ZAP/3/45") in new stack
-- Called 3/45
-- Zap/3-1 answered Zap/4-1
-- Attempting native bridge of Zap/4-1 and Zap/3-1
Thanks in advance.
----- Original Message -----
From: "Tzafrir Cohen" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Monday, July 31, 2006 8:48 AM
Subject: Re: [asterisk-users] Disable native bridge between two zap trunks
On Mon, Jul 31, 2006 at 08:38:45AM +0200, Vincenzo VD. Di Donna wrote:
Hi,
I'm using AAH version 2.6 with Diguim TDM400P.
How can I disable native bridge between two zap trunks?
Any help or suggestion is welcome
Thank's
PS: I posted a similar question last week without answers.
Which brings up the obvious question: why would you like to disable the
native bridging?
--
Tzafrir Cohen sip:[EMAIL PROTECTED]
icq#16849755 iax:[EMAIL PROTECTED]
+972-50-7952406 jabber:[EMAIL PROTECTED]
[EMAIL PROTECTED] http://www.xorcom.com
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
