Patrick wrote:
On Mon, 2006-07-31 at 13:25 +0200, Klaus Darilion wrote:
Hi!
We have implemented AOC-D and AOC-E passthrough support for Asterisk
(both Asterisk 1.2 and SVN trunk). Currently this works only with ZAP
PRI channels.
With this feature Asterisk forwards AOC messages received from the telco
switch on bridged ZAP PRI channels. This is very useful, if Asterisk is
between a legacy PBX and the telco line.
What if you want Asterisk to pick up the AOC and stick the value for
example in the CDR database? Is that possible?
I guess it would be possible, but it is not implemented (not needed here
in my setup). Maybe you cann add support for this.
> Also, how can one find
out if AOC-x is transmitted over the ISDN line? I'm in .nl and have a
BRI but don't know if my telco (KPN) sends AOC info with a call setup or
during the call.
Enable Q931 debugging. AOC-D is transmitted using FACILITY messages.
ACO-E is transmitted as facility IE (information element) in DISCONNECT,
RELEASE or RELEASE_COMPLETE message.
You may request AOC data during call setup, but usually, if the ISDN
line is configured to send AOC, this is not needed.
regards
klaus
Regards,
Patrick
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
