Hi Steve, I need to enable the Unicall channel in my asterisk box to be able to interconnect to a local telco provider using MFCR2. I use the unicall release unicall-0.0.3pre9 and a patch for asterisk 1.2. Compilation was done with ease. The problem is that I got an error "Unable to read supervisory tone set hk" once I load the chan. I am using 1.2.9.1 version. Is there any new version that could use.
Regards, Leonimar --- Steve Underwood <[EMAIL PROTECTED]> wrote: > Barzilai Spinak wrote: > > > Thank you Steve. > > About the configs in Asterisk... I confess that > I'm new to the code so > > I still need to read more. I didn't know about > ast_config() > > > > About the hardcodedness of the countries... that > seems to be the > > "problem". Everything is too oriented to "my > country works like this > > with this telephone company". > > When in fact, what I'm using is not even to > connect it to a the > > telephone company of my country but to some other > machine which has an > > old Call Center implementation with some other > modification of the MF > > R2 sequence. > > It doesn't relate specifically to any country. > Yes, they are all > > similar, and being able to specify the number of > ANI and DNIS/DID is > > sometimes all you need, that's why I could make it > work. > > Well that's just a weird system. Config files tend > not to get over > those. See Mexico support in Unicall for an example. > :-) > > > > > There's some truth in your statement that opening > the configuration to > > external files may get some people into trouble. > > On the other hand, what I see is a strange mix of: > > a) If you're doing telephony stuff you should know > what you're doing > > b) Most people using Unicall (Asterisk for that > matter) have very > > little idea of what they are doing and why > (copying and pasting > > configs from here and there). > > > > So, where's the sweet spot? :-) > > Most users are in category b. Usable by people who > don't know what they > are doing is paramount. As I said, config files > don't get over most > problems beyond what you can configure right now. > > > > > I can spend 1 hour reading the source code and > finally knowing how to > > change it to my needs. (For example, adding a new > "country") > > Should I need to? Can people from the (b) set do > it? > > Is it scalable? What is more of a support > nightmare? > > > > Please take all this as constructive comments. I > really appreciate > > your work and if I had to do it from the start it > would take me months > > longer!!! > > > > > > A real question that should go in a different > mail, but what the check: > > > > Let's say I have two E1 spans, but one needs to > talk > > CountryFooVersion, and the other needs > CountryBarVersion (yes, both on > > the same machine and in the same "country", maybe > different number of > > digits for ANI). > > Each channel is individually configured. You could > have 30 different > configurations on a single E1. > > > How would I go about configing that? > > In a unicall.conf file for chan_unicall? Set a > configuration. Define > some channels. Set a new configuration. Define some > more channels. The > most recent configuration is used as each channel is > defined. > > Regards, > Steve > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com > -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users