----- Original Message -----
From: "Steve Davies" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<[email protected]>
Sent: Monday, July 31, 2006 5:57 AM
Subject: Re: [asterisk-users] SNOM 360
On 7/28/06, Dovid Bender <[EMAIL PROTECTED]> wrote:
Also SNOM says by Vlan to set the vlan and then the value for the qos.
When
you set Vlan to 0 it is supposed to be no Vlan. However once I set it the
vlan on the SNOM to 0 and I reboot the phone is no long accessable from
the
network and I have to reset it.
The "Qos" field is part of the 802.11q header, so is only available if
a VLAN has been configured.
VLAN 0 is a perfectly valid VLAN, and will cause an 802.11q packet
header to be added to all the phone traffic. This will then only work
if the rest of the network understands "tagged" VLAN 0 packets.
Regards,
Steve
When I set it to 0 I loose all conectivity to the phone. Cant ping it or
anything. I have to reset it from the phone to get access to it again.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
