Marcus Carlson wrote:
Thomas Artner skrev:
Hi!
I have two extensions (25 and 26, and so two phones) for one person in
an office.
I can dial 25 or 26 and always both extensions are ringing. Thats okay!
exten => 25,1,Dial(Sip/25&Sip/26)
exten => 26,1,Dial(Sip/25&Sip/26)
The problem with this solution is, if the person is talking on one phone
and 25 or 26 is called from anywhere, the other phone is ringing.
But I would like a busy signal if the person is talking on one of these
two phones.
How could I do that in the dialplan? I couldn't find something to check
whether one of these two channels is busy or not.
Any suggestions for me?
thx,
Thomas
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
This might be what you're seeking;
http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+ChanIsAvail
If the phone rings, then the channel IS available. The solution is to
disable call waiting on the SIP device.
--
Now accepting new clients in Birmingham, Atlanta, Huntsville,
Chattanooga, and Montgomery.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
