On Monday 07 August 2006 06:36, Chris Hembrow wrote: > I am new to asterisk, and learning as I plod along. Currently, I am > trying to work out how to create a ring group without using AMP.
You should check out the book - 'Asterisk: The Future of Telephony' - published by O'Reilly it's available to buy or download. It will give you a good starting point. > I set my inbound line to ring multiple lines by using > Dial(SIP/101,SIP/102) but when I answered the call, the lines which > didn't answer became locked with no dialtone, as though on a call. That dial line should be Dial(SIP/101&SIP/102) - the comma (or a pipe, |) separates what to dial from the options to the dial command. typing 'show application dial' from the Asterisk CLI will get you all the gory details. > I thought that setting up a ring group might help, but could only find > references to creating them through AMP. 'Ring Group' is just an AMP term, you are going about it the right way above. HTH hads -- http://nicegear.co.nz New Zealand's VoIP supplier _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
