Tzafrir Cohen wrote:
On Wed, Aug 09, 2006 at 12:05:30PM +0200, support_list wrote:
I want to connect two ISDN bri card directly.
Is it necessary to use a cross-cable?
No. A standard (non-crossed) ethernet cable will work, as long as it has
all 8 wires.
I disagree. If the pin layout of the ISDN cards is in TE mode on both
cards, then you do need a crossover cable. Usually the cards are in TE
pin layout, except some cards have onboard jumpers for changing the
pin-layout to NT mode (like junghanns quadbri).
I guess in your case you need a BRI crossover cable.
attached is a picture of an ISDN BRI crossover cable (from Diva Server
Adapters Installation Guide)
regards
klaus
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
