Thanks Rana,
We got a prompt response from Sangoma and gave them SSH access to
troubleshoot the issue. Modifying relaxdtmf on its own did not help but
if used in combination with rxgain it made all the difference. The
system is working pretty good now with these two modifications:
relaxdtmf=yes
rxgain=6.0
Rana Dutt wrote:
We experienced this problem with a Sangoma A104D card. With echo
cancel turned on, the card was not detecting incoming DTMF digits to
our IVR properly. However, when we added the line relaxdtmf=yes to
zapata.conf, the problem went away. If the relaxdtmf setting is not
curing the problem for you, I would suggest sending an email to
[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>.
Rana Dutt
Softel Solutions
rdutt at softelinc dot com
------------------------------------------------------------------------
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Andres
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
