protocolvariant=br,20,16,16
I have the following configuration:
Astetrisk ---- E1 ----- PBX----E1----Telco
But Steve, after changing versions it really started to work without any modification in the .conf files. It was simple as that: before nothing worked and I had plenty of error messages from the MFC/R2 on the Asterisk log and after installing the different version it started to work. So I considered not to troubleshoot the problem because it had been resolved. As both files has different sizes, surely there is a difference between them.
Thierry
>
> Hi Carlos,
>
> I had the same problem and spent a lot of time studying the MFC/R2
> protocol .... but the problem is in the libmfcr2 package version!!
>
> Try using the packages in:
>
> http://www.soft-switch.org/downloads/unicall/unicall-0.0.3pre7
>
> And not in pre9.
>
> Both "pre7" and "pre9" have libmfcr2-0.0.3.tar.gz
> < http://www.soft-switch.org/downloads/unicall/unicall-0.0.3pre7/libmfcr2-0.0.3.tar.gz>
> with the same name.. but in different sizes. They are different.
pre9 works just fine. His problem is something completely different. His
configuration does not match the requirements of the PBX.
Steve
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
