I struggled with one provider for a long time until finally realizing my username on their site was not my username that I was supposed to be using in sip configuration. Make sure you are using the right username and password. However, it would seem that you would not be able to make an outgoing call using the wrong username/password combination.
One thing I have not seen in your posts is your firewall information. Your firewall may be setup to allow outgoing connections, but not incoming. I would not depend on info from a provider. You may very well be registering with them, but your firewall may be blocking the incoming call. If you think you have no firewall, check again. IPTABLES might have loaded itself and it may be blocking. Try:
service iptables stop
and then try the incoming call again. I've been burned twice due to this. Something has changed in the way I configure my linux boxes, and for some reason iptables is starting.
On 8/14/06, Rich Adamson <[EMAIL PROTECTED]> wrote:
Crazy Boy wrote:
> Hi,
>
> Thank you for your response. As you said, I executed the command "sip
> show registry". But, its not showing anything. Teliax people are also
> telling that my Asterisk server doesn't register with Teliax. So, the
> final conclusion is "My Asterisk server doesn't register with Teliax".
> Here I am giving my configuration files. Now, What I have to do to
> register my Asterisk server with Teliax? Please tell me.
>
> SIP.CONF contents:
>
> [general]
> register => xyz.abc:[EMAIL PROTECTED]
> [authentication]
> auth = xyz.abc:[EMAIL PROTECTED]
Double check the above two statements to ensure the userid and password
are exactly those provided to you by teliax. There is nothing else in
your config that impacts the register statement with the exception of
nat'ing.
It would appear from your other config statements that asterisk might be
located behind a firewall or nat box. If so, read the documentation on
that, and look at the asterisk/configs/sip.conf.sample file.
Specifically the section on "NAT SUPPORT".
You might also want to read more about using the diagnostic tools
available to you within asterisk. Setting verbose and/or debug to a high
number and copy/paste the CLI output associated with the problem. Or,
start using the CLI with something like:
asterisk -rvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
> [teliax-incoming]
> exten => 3031234567, 1, Answer()
> exten => 3031234567, 2, Dial(SIP/105,15)
The above has nothing to do with registering with teliax, but you do not
want to "answer" a call before ringing the sip phone. Take that
statement out of there. When the sip phone answers an incoming call,
asterisk will automatically send the answer to teliax.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Lacy Moore
Aspendora, Inc.
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
