In that case, if I set qualify=1000, and it still polls every 60s, then how can
it consider it unreachable at 1000ms?
Doug.
-----Original Message-----
From: Joshua Colp [mailto:[EMAIL PROTECTED]
Sent: Mon 8/14/2006 1:42 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Cc:
Subject: Re: [asterisk-users] SIP Qualify
----- Original Message -----
From: Douglas Garstang
[mailto:[EMAIL PROTECTED]
To: Asterisk Users Mailing List -
Non-Commercial Discussion [mailto:[EMAIL PROTECTED]
Sent:
Mon, 14 Aug 2006 20:24:35 -0300
Subject: [asterisk-users] SIP Qualify
> Ok, what's the deal with qualify in sip.conf. The docs on the voip
wiki at:
>
> http://www.voip-info.org/wiki/index.php?page=Asterisk+sip+qualify
>
> state that it can take either yes, no, of a number which represents
how long
> in milliseconds between polling. I set it to 1000, (ie qualify=1000),
did a
> reload, and it's obviously polling at 60 seconds, not 1 seconds, as
> evidenced from an ngrep trace.
The value that qualify takes is the maximum time to accept before
considering the device unreachable. If I set qualify to 200ms, and my device's
qualify time is 250ms then the device will be considered unreachable.
> I'm guessing the wiki is wrong, because it also says the default
polling
> period is 2s, not 60s.
>
> Can someone update that? Can ANYONE fix those pages on the voip wiki?
Yes, you can. voip-info.org is a wiki that anyone can
update/change/modify.
> Doug.
Joshua Colp
Digium
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
