Hello, I am trying to figure out the maximum capacity of concurrent SIP users(SIP to Zap T1 channels) on my asterisk system. I assume that the processor/RAM is the weakest link in the chain in terms of capacity right now.
* see my configuration below Right now with 18 concurrent users on SIP phones going out through Zaptel T1 channels I get an average of a 0.30 load average and 25% of my total RAM is in use. One of the things I noticed is that the 1 second load average may spike up to 0.90 and then go back down to 0.10 and the CPU idle will go from 100% to 0% every few seconds. I never have any iowait so I know nothing is getting backlogged. With my current equipment in this machine could I conclude that I can reliably expect to have 60 cuncurrent SIP-to-Zap users on my system? Configuration: Asus 800MHz bus Motherboard P4 2.8GHz with 800MHz bus 2GB DDR400 RAM SCSI RAID 10 (4 drives mirrored and spanned) one Digium T400 card 3 T1s plugged in RedHat linux 9 no Xwindows or unnecessary services running Any help would be appreciated, MATT--- _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
