On Thu, 2003-11-06 at 21:02, PBX wrote: > To all Asterisk guru's... > > Here is my question. > > 1. Asterisk PBX - 5 Trunks / Incoming lines > 2. 1 Building - 3 Companies (sharing phone system) > > > Ok that's the basic layout. Here's the low down - Each company will > have one dedicated channel for there company. The other 2 channels they > want to be set aside as rollover's (rotary). That is not an issue. > Where my concern is, how can I specify if they call Company A and > primary line is busy and it rolls over to one of the spare lines, how do > I designate which Auto Attendant is played. If it was certain channels > set aside for certain companies that would not be an issue. > > Any one have any ideas on how to accomplish this. Is there a way to > look and see where the call was originally designated for.
Get E&M wink DID lines. The line signals a call, you pick up, X number of digits are passed in DTMF, and you wink the line and then answer the line with the appropriate extension signaled. You set these DID numbers up as a nice Goto that jumps to the appropriate companies start extension in the appropriate context. This way also all 5 lines can be used by any company, or you can place counters that would let you play a message saying something and then hangup to free the line up for your remaining companies. -- Steven Critchfield <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
