Benjamin Lawetz wrote:
Still no answers huh?
I've asked a couple of time how to do this, and by the lack of answers, I'm
guessing there is no way.
The workaround unfortunately is to create an entry for each IP address in
the range (I hope you don't have to open up a whole C class)
-----Original Message-----
How do I enter a trunk with multiple IPs.
xyz voip provider has 4 IPs and I want to allow incoming from any of
them: 1.1.1.1, 1.1.1.2, 1.1.1.3 and 1.1.1.4
Do I put 4 separate host= lines, do I put a single host=line that is comma
separated or do I have to set up 4 separate incoming trunks?
Here's an iax.conf example of what I'm using:
[teliax]
context=teliax-incoming
type=user
auth=md5
secret=mysecret
jitterbuffer=yes
disallow=all
allow=gsm
deny=0.0.0.0/0.0.0.0
permit=207.174.202.0/255.255.255.0
The last two statements essentially restrict incoming calls from teliax
to one of their class-c networks (regardless of how many servers or IP's
they have).
Note that on incoming calls the host= line is not used.
If you're really asking how to do that for outgoing calls, you'll
probably have to do it through three/four sections (type=peer) and deal
with those sections in your dialplan.
As a side note, there are a large percentage of * implementors that
don't understand the search terms when an incoming call is being
negotiated (eg, is host= used, is secret= used). Without that
understanding, calls likely come into different sections then what the
implementor actually expected. The deny & permit statements are very
useful to tighten down security for each incoming context.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
