That worked great!.
I was using Ring_WaveForm and I guess it's case sensitive and the
correct form should be Ring_Waveform.
Thanks,
Daniel
On Aug 25, 2006, at 11:48 PM, Shanon Swafford wrote:
This works for me on my SPA-3000 ver 3.1.10(GWd).
<Ring_Waveform>Trapezoid</Ring_Waveform>
Then back to default.
<Ring_Waveform>Sinusoid</Ring_Waveform>
PAP2-NA shouldn't be any different.
Regards
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Daniel Salama
Sent: Friday, August 25, 2006 6:27 PM
To: Non-Commercial Discussion Asterisk
Subject: [asterisk-users] Linksys PAP2 Ring Settings
I have a few PAP2-NA that are being "mass configured" using the
instructions on the wiki for the Sipura mass configuration.
However, I need to make sure the following settings are in place as
follow:
Under the Regional Tab, I need the Ring Waveform to be Trapezoid
instead of Sinuzoid and the Synchronized Ring to be Yes instead of
No. I made an entry in the XML file for Synchronized_Ring which works
just fine. However, no matter what I use for the Ring Waveform
(Waveform, Ring_Waveform, Regional_Ring_Waveform), the setting is
always the default (Sinuzoid). Does anyone know what the XML tag name/
settings need to be for changing the Ring Waveform?
Thanks,
Daniel
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
