On 2006-08-24 08:43:01 -0700, Ronald Wiplinger <[EMAIL PROTECTED]> said:

I want that each call from PSTN goes to Asterisk to the context for this line. Within this context can be a menu or a dial command, ...
As more I read, as more I get confused, ... and each try is not working!
I don't know if it's the same, but I am using the wellgate 3701A (1FXO/FXS) box with asterisk and it's working all right.


My sip.conf:

[WG88621001] type=friend defaultip=192.168.250.244
insecure=very
context=incoming_WG
dtmfmode=rfc2833
[EMAIL PROTECTED]
language=en
nat=yes
auth=md5
host=dynamic
canreinvite=no
disallow=all
allow=ulaw
allow=alaw
allow=g726
allow=g729
username=88621001 fromuser=88621001 secret=xxxxxxxx qualify=yes
canreinvite=no


extensions.conf
[incoming_WG]
exten => s,1,NoOp(*** I am here now ***)



Wellgate settings:

Network Interface: IP address of the device 192.168.250.244

Sip Config: Mode Proxy
    Primary Proxy IP address:  192.168.250.20
    Line 1 Number:    88621001
   Security Config
    Line1 Account:  WG8862001
    Line 1 password:   (secret from the asterisk setting)

Line configuration
Line 1 (LINE) Type: FXO Hunting Group: 1 HotLine: 601 Registration: Not Registered Status: Ready

System Configuration
    Keypad type:   rfc2833

Routing Table
    Index: IP Default     Destination: FXO              E.164: x
    Index: FXO             Destination: IP Default      E.164: x



*CLI> sip show peers like ^WG
Name/username Host Dyn Nat ACL Port Status WG88621001/88621001 (Unspecified) D N 0 UNKNOWN 1 sip peers [0 online , 1 offline]



Calls from PSTN comes to the IVR asking for the extension number and than nothing happens. Asterisk shows nothing either.

Can somebody enlighten me:
1. Do I need to have a register statement in sip.conf?
(I tried register => 88621001:secret-from-above   ; Wellgate GW.3801-Line-1)

2. where to turn off the IVR?

3. Do I use the right  name, user name, line account, line ????

4. Hotline. Why, how, which number??

I have to sleep now, but I will review the setting on my rig tomorrow. I seem to remember the routing table was the key to making it work...

Till tomorrow.
Marty


_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to