When I do echocancel=yes it stops working. I have to have it at no in order
for it to work.
----- Original Message -----
From: "Dovid Bender" <[EMAIL PROTECTED]>
To: "Dovid Bender" <[EMAIL PROTECTED]>
Sent: Friday, August 25, 2006 12:23 PM
Subject: Fw: [asterisk-users] [RESOLVED] One way audion on Sangoma
----- Original Message -----
From: "Michiel van Baak" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Friday, August 25, 2006 11:43 AM
Subject: Re: [asterisk-users] [RESOLVED] One way audion on Sangoma
On 11:24, Fri 25 Aug 06, Andrew Kohlsmith wrote:
Digium hardware echo cancellation cards also require you to say
"echocancel=yes" in zapata.conf. The zaptel driver recognizes that the
card
possesses echo cancellation hardware and does not engage the software
echo
canceller for those channels.
To summarize: if you want echo cancellation on Zaptel channels, you must
enable it (echocancel=yes, or a number of taps) in zapata.conf. If
hardware
echo cancellation exists, it is used over software echo cancellation.
Note
that if hardware echo cancellation hardware is detected, the # of taps
is
ignored and the hardware uses whatever it has internally.
echocancel=no/off in zapata.conf will disable the echo cancellation in
Zaptel,
whether it is hardware-based or software-based.
thnx, I'll now go back to reading docs before I say anything
stupid again.
--
Michiel van Baak
[EMAIL PROTECTED]
http://michiel.vanbaak.eu
GnuPG key: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x71C946BD
"Why is it drug addicts and computer afficionados are both called users?"
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
